Navigation : Home  >  Firmware  >  Post Detail

CLEANROM Android 4.4 KitKat V2.1.3 update for Onda V989 Octa ver.

[ Firmware ]

9.7 inch Retina Display Onda V989 Octa Core Google Android 5 Tablet Computer

Onda V989 octa edition is 2.0Ghz big.LITTLE Octa core Android 4.4 KitKat tablet PC with 9.7 inch 2048*1536 pixel definition retina display. It support micro USB 3.0, Bluetooth 4.0, WiFi 802.11 b/g/n, 8.0MP AF rear camera!

This firmware is optimized Android 4.4.2 V2.1.3 version based on stock rom ver 2.1.0. Please update the firmware in a Windows system computer!

Pictures are for reference only. We do not recommend you to upgrade your device if there is nothing wrong with it. And all risks at your own. We do not reponsible for any damges might happen to your tablet!

Note:

1).To download the files from vmall website, please click the first blue button;


How to upgrade:

1).Download the upgrade tool – Phoenix Suit v1.0.6, and install in your windows computer, then open. Click the icon showed in following picture.

2).Check the SN number on the back of the tablet to find the edition you have (for example, it shows “V989BBE7V3A00020”, then it is V3 edition). Now download the firmware ( Onda V989 Core8 V3_edition or Onda V989 Core8 V4_edition) and extract to desktop in your computer and click the Image button in the software to locate to the desktop and find the firmware “V989 Core8_v2.1.3_v3_8GLDJJ-1.img“(V3 version) or “V989 Core8_v2.1.3_v4_8GLDJJ-1.img“(V4 version) file;

3).Make sure the tablet is off and does not connect to the computer. Then holding the Home button, do not release. Then connect the tablet with the computer. Now click 3 Times of the power on button. You should hear some noise now from computer of new device connecting the computer, now you can release the Volume button. Note: if your tablet is auto turned on during this step, that means you have pressed the wrong button or does not do correct, please try again!;

4).The computer would start to install the driver for the tablet, if it does not install successfully, please install the driver manually (the driver folder is under the Phoenis folder downloaded). After the tablet’s driver installed, the Phoenix Suit would pop up a window, then choose YES, and another window choose YES again;

5).Do not touch the tablet and wait until the firmware is fully installed successfuly;

After that, you can now turn the tablet on.

Before you do any firmware-install,please make sure your device is fully charged!

If you have any doubt about the firmware,don't hesitate to leave us a comment!'

 
Post Attribute
No Comment

(Ctrl + Enter quickly submit)   

Related Post